△ Design of Bending Radius
In the design process of flexible PCB, it is crucial to understand and control the bending radius. Since the copper foil and substrate will be stretched or compressed when bent, a too small bending radius may cause fatigue cracks or even breakage of the copper foil. To ensure the stability and durability of the product, designers need to follow certain bending radius standards. Specifically, for static bending, the minimum bending radius is usually recommended to be set to 5 to 10 times the thickness of the board; for applications that need to withstand dynamic bending, such as the hinge area of folding screen mobile phones, the minimum bending radius should be increased to 15 to 20 times the thickness of the board.
△ Wiring Principles and Via Optimization
In the design of flexible PCB, right-angle and 90° corner wiring methods on rigid PCBs should be avoided, because these methods will cause severe stress concentration on flexible PCBs, thereby increasing the risk of copper foil breakage. Applying arc corners such as 45° angles or arc corners can reduce stress concentration.
Vias should be avoided as much as possible in the bending area to reduce the risk of copper foil breakage.
The pad teardrop design is adopted, that is, a transition area is added at the connection between the pad and the trace to improve the mechanical strength of the structure.
△ Reinforcement board and manufacturing challenges
In certain key areas of flexible PCBs, such as the connector plug-in area, it is particularly important to increase rigidity to prevent possible damage. To this end, a reinforcement board can be added to the local position of the FPC to improve the mechanical strength. Common reinforcement board materials include FR4, which can significantly enhance local rigidity and prevent deformation.
However, the manufacturing process of flexible PCBs is significantly different from that of rigid PCBs, and faces a series of unique challenges, including the choice of laser cutting and mechanical punching, because FPC usually uses laser cutting to avoid substrate tearing. In addition, the alternative use of Coverlay and Solder Mask is also a major challenge, because FPC prefers Coverlay for better mechanical protection. At the same time, temperature control during the welding process is critical to prevent pad warping or delamination.

